We offer a large array of products to meet the needs of class 100,000 to class 1 clean room environments. Some of our products we manufacture in house, others we have chosen to carry because we have come to trust the quality and economy of the products themselves.
|
Leak Detection Cable Controller LD2100Distance-read leak detection that is capable of monitoring up to 5,000 feet of sensing cable. |
|
Leak Detection Sensing Cable- Conductive FluidsReliably detects possible damaging water leaks and other conductive fluids. |
|
Leak Detection Cable- Acids/ChemicalsReliably detects leaks via the presence of acids, bases, and other conductive liquids. |
- |
Leak Detection Cable Controller LD5200Distance-read leak detection that is capable of monitoring up to 10,000 feet of sensing cable. |
- |
Leak Detection Cable Controller LDRA6A six zone leak detection controller or a remote alarm annunciator. Compatible with SeaHawk sensing cables and SeaHawk SD-Z and SD-Z1 spot detectors. |
- |
SeaHawk 10KThe SeaHawk 10K distance-read leak detection controller monitors up to 10,000 feet of sensing cable. Compatible with SeaHawk sensing cables and the SeaHawk SD-Z spot detector. |
- |
Leak Detection Cable Controller LD1500Distance-read leak detection that can monitor up to 1,500 feet of sensing cable. |
- |
Leak Detection Cable Controller LD1000The SeaHawk LD1000 is a single zone leak detection controller that monitors up to 1000 feet of sensing cable. |
- |
Seahawk LD310 Leak Detection ControllerZone leak detection controller. Monitors up to 300 feet of sensing cable. |
- |
SD Spot DetectorSpot leak detector designed primarily to be used in conjunction with RLE's FMS, WiNG-MGR, and RA1x2. |
- |
SD-RO1 Spot DetectorThe SD-RO1 is a single zone spot leak detector with one relay output. It can be used in conjunction with any products that accept a dry contact input. |
- |
J-clips for Conductive Fluid Leak Detection CableUse J-clips to keep your conductive fluid sensing cables secure and in place. |
- |
J-Clips for Chemical SensingUse chemical sensing cable J-clips to keep your sensing cables secure and in place. |
- |
Cable Caution TagsUse to clearly mark the location of sensing and non-sensing cables. |
- |
Cable Connector KitTools that allow you to construct your own conductive fluid sensing and non-sensing cable. |
- |
Cable TesterTest sensing cable for contamination or detected leaks. |
- |
Framed Reference MapUse this framed map to help identify the precise location of a leak. |
- |
Leader Cable KitUse to connect your sensing cable to a controller and terminate your cable installation. |
- |
Leader Cable Kit -ChemicalUse to connect your chemical sensing cable to a controller and terminate your cable installation. |
- |
Leak Detection Cable Controller LD310Single zone leak detection capable of monitoring up to 300 feet of sensing cable. |
- |
Sensing Cable Adapter KitUse to reverse the connector type if sensing cable is installed backwards. |
- |
Weighted Cable ConnectorProvides distinct separation between sections of sensing cable. |
- |
Weighted Cable Connector - Chemical SensingProvides distinct separation between sections of chemical sensing cable. |
- |
X-ConnectorBranch sensing or non-sensing in three separate directions. |
Items In Cart : 0 | |
Total : | $0.00 |